Low viscosity Excellent adhesivity Liquid-forming
Silica Gel EG-N100T
LEED-INK silica gel is a liquid-forming silica gel which could be
cured either under room temperature or through heating. It has
features of excellent moisture&water proof, weather proof,
ozone&radiation resistance. It could be long term used under
-40℃-200℃, with good electrical property and chemical stability.
Before vulcanization, it is colorless transparent liquid form and
separately packaged with component A and component B. It is with
low viscosity that easy of potting. After vulcanization, it is
transparent viscoelastic body with low modulus, high elongation
& adhesion, strong self-healing capability and tearing
- Low viscosity
- Excellent adhesivity with various materials such as ceramics,
metal, plastic, etc.
- Strong self-healing capability, high tearing resistance, excellent
|Colorless, transparent||Colorless, transparent||Colorless, transparent|
|Thermal Conductivity (W/m.K)||0.2|
|Surface Drying Time(h)||2.5|
|Curing Time (h)||25℃/24h, or 90℃/1.2h|
|Volume Resistance (Ω·cm)||1×1014|
|Operating Temperature (℃)||-40℃-200℃|
The silica gel is widely used in filling of electronics, electrical
appliance, instruments and meters components, in order to achieve
insulation, sealing, damping, moisture&shock proof purpose.
1) Component A and component B should use special tools separately.
Do not use the tools in mixture.
2) Separately stir component A and component B fully and evenly
3) Mix according to A:B=1:1, and stir it over 15min to ensure the
mixing uniformity of component A and B.
4) After mixing, deaerate the paste in vacuum equipment with 10min
before potting. To ensure the potting quality, it is recommended to
deaerate again after potting.
5) Please finish 3) and 4) within operating time(1-2h).
6) Curing could be done by 90℃/1.2h, or 24h in room temperature.
During storage and using process, please avoid contact with
inorganic substances which includes nitrogen, phosphorus, sulfur,
tin, lead and others. Otherwise the catalyst in the product would
be lose efficacy without sulfuration.
Please put the products in dry and cool places. Do not mix
component A and component B during storage.
Delivery and Storage
During transportation and storage should protect against the tide
and contamination. Containers may be stored in a cool dark, dry and
stable environment at room temperature, with their lids tightly
sealed. The shelf life of the paste is 12 months. The used material
should be collected and sealed up alone. Don’t mix with other
untapped material. Pay attention to prevent moisture and impurities
The general package is 1KG/Plastic jar, 5KGS/Plastic bucket, and